China Super-hard Tool Grinding Machine

Produktdetails:

China Super-hard Tool Grinding Machine Product Features:

China super-hard tool grinding machine the harder the grinding roll surface, the softer the hardness of the grinding wheel should be. 1. If the tool grinding wheel wears too fast, it means that the grinding wheel selected for the particular processed roll is too soft, the following improvement measures can be taken: A. Increase the line speed of the grinding wheel; B. Increasing the longitudinal feed speed of the carriage, that is, the longitudinal feed of the workpiece per revolution of the carriage is increased to 2/3~3/4 of the width of the grinding wheel; C. Reduce the speed of the rolls. If the above measures are taken, no obvious grinding effect has been obtained, indicating that the grinding wheel is too soft and not suitable. A harder grinding wheel should be selected. 2. If China Carbide Tool Grinding Machine grinds the roller, the grinding wheel is obviously blocked or dirty, the passivated sand is not easy to fall off, the grinding wheel is easy to stick to the grinding debris, and the grinding roller surface is burned and pulled, indicating that the grinding wheel is too hard. Take the following measures to improve: A. Reduce the speed of the grinding wheel; B. Increase the roller speed. If the above measures are taken, no obvious grinding effect has been obtained, indicating that the grinding wheel is too hard, and a softer grinding wheel should be selected.

China Super-hard Tool Grinding Machine Application And After-sale Service:

China Super-hard Tool Grinding Machine is designed for the economical manufacturing and regrinding of cutting tools made from PCD, PCBN, CVD, tungsten, carbide, and other materials. It can grind angles and radii on standard and special turning and milling inserts, boring tools, grooving tools, and many types of special turning tools. BT-150M PCD&PCBN tool grinder After-Sales Service: In order to facilitate users to operate the machine, we also provide the instruction manual, circuit diagram, and adjusting videos, not including the quick-wear part; with a one-year limited warranty.

Technical Parameters of China Super-hard Tool Grinding Machine:

Spindle and Grinding Wheel
The diameter of the Grinding wheel	150mm
Direct Drive Spindle with Water Cooling	3KW
RPM of Grinding Spindle	0～3,000RPM
Changeable Clearance Angle	-5°~25°
Grinding wheel center hole	40mm
Spindle Center Height	150mm
Grinding Wheel Oscillation System(X-Axis)
PLC Numerical Controlled Oscillation and Control on the Panel
Max. Oscillation Range		30mm
Max. Oscillation Frequency		60times/minute
CCD Monitoring System
Max Magnification of Optical Microscope		4 times
Magnification of CCD Measuring System		80times
Industrial Displayer		15“
CCD Image Resolution		1280*1024
Feed and Rotation System
The compressor of Air Braking on Rotation Axis		6bar
Tool rotation (B axis) controlled by PLC. Can be switched to manual mode.		LCD input
Horizontal Transverse (Y-Axis) Driven by Air		70mm
Linear Encoder Resolution (X-Axis and Y-Axis)		0.001mm
Power Supply and Dimensions
Coolant Tank with Filter Paper		about70L
Electrical Supply		12Kw
Voltage Requested		380V/Three-phase /50Hz
Overall Dimensions L╳W╳H		1700╳1150╳1970mm
Weight With Coolant Tank		2000Kg